System message

Settings in provider.properties

1. SIP users info that JTAPI applications will use internally.
   These users will be registered to SIP Server.
   
   regist.local1.username =1234 --- user 1's user name
   regist.local1.authuser =1234 -- user 1's SIP auth user name
   regist.local1.authpassword= 1234 --- user 1's SIP auth password
   regist.local1.displayname = 1234 --- user1's display name
   regist.local1.expires = 3600 --- user 1's REGISTER expiration period
   
   regist.local2.username =5678 -- user 2's user name
   regist.local2.authuser =5678 --- user 2's SIP auth user name
   regist.local2.authpassword= 5678 --- user 2's SIP auth password
   regist.local2.displayname = 5678 -- user 2's display name
   regist.local2.expires = 3600 -- user 2's REGISTER expiration period
   
   You can add as many users as possible.
   Just continue set as regist.local.username
   
   
2. SIP users info that JTAPI applications will use internally.
   These users will NOT be registered to SIP Server.
   nonregist.local1.username =4321
   nonregist.local1.authuser =4321
   nonregist.local1.authpassword= 4321
   nonregist.local1.displayname = 4321
   
   You can add as many users as possible.
   Just continue set as nonregist.local.username
   
   
3. Other settings
   sipproxy = 192.168.0.5 --- SIP proxy IP address
   sipdomain= --- SIP domain name
   mysipport = 55060 --- SIP port that the JTAPI application will use
   usesameport_in_out = false -- Whether you will use the same port for both incoming and outgoing calls.
   inboundsessions = 5 --- number of incoming concurrent sessions
   outboundsessions = 5 --- number of outgoing concurrent sessions
   #use_refer_for_attended_transfer = true --- Whether you will user REFER method for attended transfer
   use_refer_for_blind_transfer = true --- Whether you will use REFER method for blind transfer
   refer_response_timeout = 10000 -- REFER response timeout
   send_dtmf_method = inband -- DTMF sending method option:inband, info
   send_dtmf_wait = 1000 -- inter digit wait period (millisecond)
   record_tail_cut_millisecond= 2700 -- Cut length from the tail of call recording