Notification:  

New   Add   Edit   Delete   Sort   Print   Change Password   Settings   Permissions

Connecting with Yealink Phones

This document explains how to use Brekeke products with Yealink hard phones. The Yealink SIP Phone is especially designed for power users in the office environment. For more information on this product, please go to http://www.yealink.com/en/products.asp

Confirmed Models:

Yealink SIP-T28P, Yealink SIP-T20

Configure Yealink Phone

Set up Yealink phone with a fixed IP address (Ex: 172.16.200.12) and subnet mask of 255.255.0.0. Once the IP address is configured you can access phone webpage by http://192.168.200.12/ (example of selected IP address).

Please complete the following steps:

1. Enter User name: admin (default)
2. Enter Password: admin (default)
3. Click on [OK] button

Network Setup

Click on the [Network Setup] tab to complete the network setup.

• Select [Static IP Address]
• Enter the “IP Address”: 172.16.200.12(ex)
• Enter the “Netmask”: 255.255.0.0(ex)
• Enter the “Gateway”: 172.16.200.2(ex)
• Click on [Commit] button

Phone Configuration

Click on the [Account] tab, and set up

1. choose line from Account field
2. Basic setting
   
   
   • Account Active: on
   • Label, Register Name: 1212 example phone number
   • User Name: 1212
   • Password: 1212 -- set when REGISTER and INVITE Authentication are set ON at Brekeke side
     
   • SIP Server: 172.16.200.68 (ex)
     
   • Voice Mail: 8
3. Advanced Setting
   
   
   • Subscribe for MWI: Enable
4. Click on [Confirm] button

Brekeke SIP Server’s Registration Page Click the [Registered Clients] tab of Brekeke product admintool >[SIP Server]


Yealink Phone is registered at Brekeke SIP Server.