Using Brekeke PBX with a firewall

If you are using a firewall in the same machine where Brekeke product is working on,

please add "java.exe" as a trusted program in the firewall settings.
Otherwise, please open the following ports at the firewall.
- UDP: 5060 (default SIP port)
- UDP: 10000 - 10999 (Brekeke PBX v2 default RTP port at SIP Server)
  UDP: 10000 - 29999 (Brekeke PBX v3 default RTP port at SIP Server)
- UDP: 11000 - 11999 (Brekeke PBX v2 default RTP port at PBX)
  UDP: 30000 - 49999 (Brekeke PBX v3 default RTP port at PBX)
- UDP: 12000 - 12999 (Brekeke PBX v2 default RTP port at Media Server)
  UDP: 50000 - 59999 (Brekeke PBX v3 default RTP port at Media Server)

If you are using a firewall between public network and private network where Brekeke product is working on, please open the following ports at the firewall and forwarding the ports to Brekeke PBX address.

UDP: 5060 (default SIP port)
UDP: 10000 - 10999 (Brekeke PBX v2 default RTP port at SIP Server)
UDP: 10000 - 29999 (Brekeke PBX v3 default RTP port at SIP Server)
UDP: 11000 - 11999 (Brekeke PBX v2 default RTP port at PBX)
UDP: 30000 - 49999 (Brekeke PBX v3 default RTP port at PBX)
When RTP relay is off at BPBX > [Options], set
UDP: 12000 - 12999 (Brekeke PBX v2 default RTP port at Media Server)
UDP: 50000 - 59999 (Brekeke PBX v3 default RTP port at Media Server)

* If you are using any port other than the default ports, please set them at the firewall.

Username
Password
Remember me

System message

Using Brekeke PBX with a firewall

Using Brekeke PBX with a firewall