Close

Wiki

Notification:  
v3.0.2 Professional

Connecting with POLYCOM SoundPoint IP 650/330

This document explains how to use Brekeke SIP Server with the POLYCOM SoundPoint IP 650/330 hard phone. The POLYCOM SoundPoint IP Phone is a standards-based IP phone that is one of the leading suppliers of innovative telecommunication solutions. It offers know-how and comprehensive technical competence in the field of analogue, digital and IP telephony, SoundPoint IP 650 phone offers exclusive devices that provide attractive design and user-friendly menu guidance. http://www.polycom.com/

Start POLYCOM SoundPoint IP 650/330 Phone

Set up your SoundPoint IP 650/330 Phone, with a fixed IP address (Ex: 192.168.0.79) and subnet mask of 255.255.255.0. Please refer to the below link to set the IP address and the user settings manually. http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip650.html or http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Once the IP address is configured you can access POLYCOM SoundPoint IP 650/330 Phone webpage by http://192.168.0.79/ (example of selected IP address).

Phone login:

  1. Enter User name: Polycom (default)
  2. Enter Password: 456 (default)
  3. Click on [OK] button
Note: the username and password are case-sensitive.

Brekeke SIP Server setting

At [SIP] page on the phone user interface, type in SIP Server IP address, Port and Transport at [Server1].
If Outbound Proxy is used, also enter the necessary information at [Outbound Proxy].

Phone Line Setting

The phone will need to register to Brekeke SIP Server so it also needs to know the SIP Server's IP address. When configuring POLYCOM SoundPoint IP 650/330 Phone, enter user/phone number (Ex.4012) in the “Identification" field and your Brekeke SIP Server IP address in “Server 1” field.

Line settings:




Use the following steps to complete the configuration:
  1. Identification field:
    1. Enter the “Address”: 4012(ex)
    2. Enter the “Auth User ID”: 4012(ex)
    3. Enter the “Auth Password”: XXXX
    4. Enter the “Num Line Keys”: 4(ex)
    5. Enter the “Calls Per Line”: 1 (ex)
  2. Server 1 field:
    1. Enter the “Address”: 192.168.0.68 (ex)
    2. Enter the “Port”: 5060(ex)
    3. Set the “Transport”: UDPonly
    4. Click on the[Submit], the phone will be restarted automatically

Note:

For more specified settings, such as DTMF setting and updated software, please use FTP/TFTP/HTTP/HTTPS to do the configuration, please refer to http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip650.html
or
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Brekeke SIP Server’s Registration Page

Click the [Registered Clients] tab of Brekeke SIP Server admintool



POLYCOM SoundPoint IP 650/330 Phone is registered with Brekeke SIP Server.