System message

Front-end Server Setup

• Dial plans used on front-end Brekeke SIP server
  

  Priority	Name	Matching Patterns	Deploy Patterns
  1	REGISTER to Server1	&lb.register = 1 $request = ^REGISTER To = sip:(.+)@ $addr = (.+) $port = (.+)	To = sip:%1@172.16.0.2 &&lb.register = 2 &net.sip.replacecontact = false &net.sip.replacecontact.nat = false X-Remote = %2:%3
  2	REGISTER to Server2	$request = ^REGISTER To = sip:(.+)@ $addr = (.+) $port = (.+)	To = sip:%1@172.16.0.3 &&lb.register = 1 &net.sip.replacecontact = false &net.sip.replacecontact.nat = false X-Remote = %2:%3
  3	INVITE to UA	$request = ^INVITE $addr = ^172.16.0.3|^172.16.0.2 X-Remote = (.+)	$target = %1 $rtp = off $continue = false
  4	INVITE to Server1	&lb.invite = 1 $request = ^INVITE To = sip:(.+)@	To = sip:%1@172.16.0.2 $rtp = off &&lb.invite = 2
  5	INVITE to Server2	$request=^INVITE To = sip:(.+)@	To = sip:%1@172.16.0.3 $rtp = off &&lb.invite = 1

  Note:
  The IP addresses in above dial plans are only for examples.
  Please change them to the real IP addresses used in your network system.
  Click [Apply Rules] button to make dial plans take effect.
  
• From front-end Brekeke SIP server admintool > [Configuration] > [SIP] -> [Authentication],
  set Authentication OFF for both [REGISTER] and [INVITE]
• Set correct system time at all brekeke sip servers