Connecting with CyberData VoIP Ceiling SpeakerThis document explains how to use Brekeke SIP Server with CyberData VoIP Ceiling Speaker. The CyberData VoIP Ceiling Speaker is a Voice-over-IP public address speaker that uses a single cable to commect to existing LANs. For more nformation on this product, please go to www.cyberdata.net
Configure for Brekeke SIP ServerOnce you have connected to the speaker, please set the following to register the speaker to Brekeke SIP Server.
CyberData VoIP Ceiling Speaker default IP is 192.168.3.10 and default login ID and password are admin/admin.
- Go to [Speaker Setup] tab, [Select Speaker Function]: SIP
- Go to [SIP Setup] tab, assign the Brekeke SIP Server adress and speaker registration SIP ID
SIP Server: 192.168.3.89(e.g.)
Remote SIP Port:5060
SIP User ID:205(e.g.)
SIP Registration: Yes
If you set authentication as on at Brekeke SIP Server side,
please also set the [Authentication ID] and [Authentication Password], which should be the same as those you have created at Brekeke SIP Sever>[User Authentication].
By default settings at Brekeke SIP Server, the Authenticaiton ID should be the same as the SIP User ID, which is 205 in this example.
- Save Settings