Configure shared line in Panasonic KX-UT1xx
The following configuration is to enable shared line at Panasonic KX-UT1xx phones when using Brekeke PBX shared call appearance(SCA) feature.Configure Brekeke products
1. For Brekeke SIP Server:
- If [Brekeke SIP Server] > [Configuration]>[SIP]>[Authenticaion]: [REGISTER] and [INVITE] is set as ON
please create authentication account from [Brekeke SIP Server] > [User Authentication]>[New User], such as
User: line-100
password: 1234
Confirm Password: 1234
- If [Brekeke SIP Server] > [Configuration]>[SIP]>[Authenticaion]: [REGISTER] and [INVITE] is set as OFF,
no additional setup is needed
2. For Brekeke PBX:
- Check the above setup in "For Brekeke SIP Server" about settings at PBX bundled SIP Server
- Create user 100 from [Brekeke PBX]>[Users]>[New User]
Configure Panasonic KX-UT1xx
[VoIP] > [SIP Settings] >[Line 2]:
set up phone SIP ID and Brekeke products IP address which phone will register to.[Phone Number]:
Phone Number: line-, e.g. line-100, 100 is the pbx user set above
SIP URI: line-, e.g. line-100
[SIP Server]:
Registrar Server Address: IP address of Brekeke SIP server or Brekeke PBX
Proxy Server Address: IP address of Brekeke SIP server or Brekeke PBX
Presence Server Address: IP address of Brekeke SIP server or Brekeke PBX
[SIP Authentication]:
Authentication ID: user authentication ID, e.g. line-100 as set above in Brekeke products
Authentication Password: authentication password, e.g. 1234 as set above in Brekeke products
[VoIP] > [VoIP Settings] > [Line 2]:
Set up DTMF and Codecs[Telephone] > [Call Control] > [Line 2]:
[Call Control]:
Display Name: e.g. line-100
Enable Shared Call: Yes
The phone registration record will show in Brekeke SIP server or Brekeke PBX bundled SIP server admintool > [Registered Clients] page, with above setting, the phone will register with SIP ID line-100.
Related link about SCA: