Brekeke SIP Server is behind NAT, what configuration is required?
- Set port forwarding on the router which does NAT.
- If above configurations doesn't solve the NAT issue, please try the following configuration.
- Go to Brekeke SIP Server admintool > [Configuration] > [System] > [UPnP]
- Set the following fields.
[Enable/Disable] = enable
[Default router IP address] = < blank >(if this field is blank, Brekeke SIP Server will use the default gateway's IP address that the machine is using)
[Cache size] = number of concurrent calls that go through the router X 2
Related Links: