From BrekekeWiki

Contents 1 Connecting with IConnectHere 2 Setting Up An iConnectHere Account 3 ARS Configuration for iConnectHere 4 Brekeke sip server dial plan settings 4.1 Making calls with iConnectHere service 4.2 Receiving calls to an iConnectHere number 5 Notes for dial plan settings 6 How to Make Calls

Connecting with IConnectHere

iConnectHere (http://www.iConnectHere.com) is the consumer division of deltathree, Inc. Deltathree is a leading provider of high-quality internet telephony products and services worldwide. This document will explain how to utilize Brekeke PBX with iConnectHere Service.

Setting Up An iConnectHere Account

Please Obtain an account from iConnectHere Website. ( http://www.iConnectHere.com )

iConnectHere Telephone Number	Server Name	User ID / Number	Password
1555#######	Sipauth.deltathree.com	1234	XXXX

ARS Configuration for iConnectHere

To define ARS Settings for your iConnectHere Account.

Open iConnectHere at [ARS] Menu > [Settings] in the PBX Admintool. Once the page displays, Click on
"Edit Variables" and enter the information for each variable.

]

1. Enter the User ID that you received from the ITSP provider for the "v1" : 1234 (Example).
2. Enter the password for the" v2" : XXXX (Example).
3. Enter the PBX extension number for receiving incoming calls "v3" :4012 (Example).
4. DID Number in "v5" :1555####### (Example)
5. Click on [Save and Update] button.
6. Go back to route template page,Uncheck [Disabled] button in General Settings.
7. Click on [Save and update] button.

Brekeke sip server dial plan settings

Dial Plan can accommodate the unique requirements of each VoIP service provider.

Making calls with iConnectHere service

Matching Patterns	Deploy Patterns
$request = ^INVITE To = (.*\.deltathree\.com)	&net.sip.addrecordroute = false $auth = false

This Dial Plan needs to be placed before "from PBX 1"(default dial plan).

Receiving calls to an iConnectHere number

Matching Patterns	Deploy Patterns
$request = ^INVITE $addr = ^213\.137\.73\. To = (.*)	&net.sip.addrecordroute = false $target = localhost:15060 $auth = false To = %1

This Dial Plan needs to be placed before"to PBX" (default dial plan)

Notes for dial plan settings

• This Dial Plan allows calls from the iConnectHere line to pass through without authentication from Brekeke SIP Server.
• In your Dial Plan, please ensure that the record route parameter does not include “lr” for calls via iConnectHere.
  If this parameter is included, you may not be able to connect with iConnectHere.
• iConnectHere uses a SIP proxy server (natrelay.deltathree.com) that supports Far-End NAT Traversal. When your
  environment does not require Near-End NAT Traversal, we recommend that you use their proxy server for your NAT Traversal needs.
• Note that you may need to periodically update Dial Plan rules that include iConnectHere’s SIP Server IP address.
  IConnectHere may change their Server’s IP address at any time.
• In this tutorial guide, [RTP relay] is set for "on" in ARS deploy pattern setting. In some cases,
  setting [RTP relay] = "off" may work; however, we have not tested all of the applicable environments.

How to Make Calls

• Incoming call: Calling from PSTN phone number in the US to Brekeke PBX extension 1001.
  Dial as: 1555###### (DID number must begins with 1)
• Outgoing Call: Calling from Brekeke PBX extension to a PSTN number in the US.
  Dial as: 9 + 001 + area code + landline number
  (Here: 9 is the prefix you defined at Brekeke PBX ARS.)